Safety Precautions
10
Do not use the voltage
other than specified
• Do not use the power supply voltage other than the one specified.
Doing so could result in a fire or electric shock.
Do not use in
hazardous locations
• The product is not explosion proof certified. Do not use in a
potentially explosive environment or atmosphere. Doing so could
result in a fire or explosion.
Do not set on an
unstable area
• Do not set the product on an unstable area, such as a wobbly table
or slanted area or on an area subject to strong vibration. The product
could fall or topple over, possibly resulting in injury.
Do not place in high-
temperature locations
• Do not place the product near heating equipment such as cooking
appliances or a heater, or in high-temperature locations. Doing so
could damage the product or result in a fire or electric shock.
When the product or
AC adapter is dropped
or breaks
• If the product or AC adapter is dropped or breaks, immediately power
off the product, unplug the power cord from the outlet, and contact
your SATO reseller or technical support. Using the product in one of
these conditions could result in a fire or electric shock.
Handling the power
cord and other cables
• If the power cord and other cables become damaged (core is
exposed, wires broken, deformed, etc.), contact your SATO reseller
or technical support. Using the power cord and other cables in this
condition could result in a fire or electric shock.
Handling the AC
adapter, power cord,
and other cables
• Do not damage, break, or alter the AC adapter, power cord, or other
cables. Do not place heavy objects on them, apply heat to them, or
place them in high-temperature locations. Also, do not forcibly bend,
twist, or pull the power cord and other cables. Doing so could result
in a fire or electric shock.
• Do not splash water on the AC adapter, power cord, and other cables
or get them wet. Doing so could result in damage or electric shock.
To Next Page
Loading...
