SATO CT4-LX User Manual

Operations in the Home Screen
38
Operations in the Home Screen
While the product is powered on, you can switch to the Home screen by pressing the (Power/
Home) button.
The Home screen does not appear when print jobs remain in the product.
You can perform the following operations on the Home screen.
(1) Enters the Settings mode. Various settings of the product can be operated here.
(2) Displays the setting menus of the SATO RF Analyze function on an RFID model. This function
allows you to measure RFID tags and easily set conditions to consistently write and read the
tags.
(3) Access media profiles (combinations of media types and print settings) that have been registered,
and apply them to the product.
An icon is added to the Home screen for each media profile that is registered in the [Tools] >
[Media Profiles Editing] menu in the Settings mode.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz