163
[Printing] Menu
The following settings are available in the [Printing] menu:
[Media Type]
Set the media type.
The options are as follows:
• [Label]
• [Wristband]
• [koDakara]
• The changes to this setting are linked and are changed with the settings in the [Tools] >
[Media Startup] menu.
[Label Length]
Set the length of the media.
The setting range varies depending on the print resolution of the product.
The setting range of the label length is as follows:
Resolution Setting range
203 dpi (1 dot = 0.125 mm (0.0049")) 1 to 20000 dots
305 dpi (1 dot = 0.083 mm (0.0033")) 1 to 18000 dots
To Next Page
Loading...
