SATO CT4-LX User Manual

Wireless LAN Interface
526
Wireless LAN Interface
This interface complies with the IEEE802.11a/b/g/n/ac standard.
• Before using wireless LAN near medical devices and facilities, consult your system
administrator.
Basic Specifications
Protocol
• STATUS3
• STATUS4
• STATUS5
IP Address
• IPv4
• IPv6
Subnet Mask / Prefix Length
• IPv4
• IPv6
Gateway Address
• IPv4
• IPv6
Data Transfer Method
802.11a
Max 54 Mbps
802.11n
Max 135 Mbps
802.11b
Max 11 Mbps
802.11g
Max 54 Mbps
802.11ac
Max 433.3 Mbps
• These are the logical values based on the wireless
LAN specifications and are not the actual data transfer
speeds.
Frequency Band
• 2.4 GHz (2.412 to 2.472 GHz)
• 5 GHz (5.180 to 5.825 GHz)
Communication Channel The number of channels you can set varies depending on the
region where you use the product.
SSID Any alphanumeric character or symbols (Maximum 32)

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz