SATO CT4-LX User Manual

15
Power Supply
Product operations can be affected by the product's environment.
Refer to the following instructions regarding how to install and handle the product.
The product requires an AC power supply.
Be sure to connect the product to an AC power supply.
Supply a stable source of electricity to the product.
Do not share its power outlet with other electrical devices. This could cause power fluctuations
and performance issues with your product.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz