[Clone]
272
◦ .pem, .crt, .cer, .der for Root CA and client certificate in PEM or DER format
◦ .pfx and .p12 for client certificates in PKCS #12 format
◦ .prv and .key for private keys in PEM/PKCS #8 format
◦ .pac for PAC files
2. Insert the USB memory into the USB connector (Type A) on the back of the product.
3. Go to the [SETTINGS] > [Tools] > [Install Certificates] menu.
4. Tap the certificate you want to install. Refer to the item description above.
5. Tap the certificate file from the list.
[Delete Certificates]
Delete certificates used for Wi-Fi authentication and for HTTPS.
HTTPS
Deletes the installed HTTPS certificates.
Wi-Fi Root CA
Deletes the installed Wi-Fi Root CA certificates.
Wi-Fi Client
Deletes the installed Wi-Fi client certificates.
Wi-Fi Private Key
Deletes the installed Wi-Fi private key.
EAP-FAST PAC File
Deletes the installed EAP-FAST PAC file.
The procedure to delete the certificates and PAC files is as follows:
1. Go to the [SETTINGS] > [Tools] > [Delete Certificates] menu.
2. Tap the certificate you want to delete. Refer to the item description above.
3.
Tap on the message.
[Clone]
Copy the current product settings and installed data to a USB memory.
Available only if you have connected the USB memory to the USB connector (Type A) on the back of
the product.
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
To Next Page
Loading...
