SATO CT4-LX User Manual

219
(When [AUTO] is selected in the [Protocol] menu)
• A message prompting you to restart the product appears on the Home screen if
[AUTO] is selected. In such a case, reboot the product to apply the settings.
• Once the printer language is set, the name of the printer language will appear on the
Online/Offline screen.
• Printer language is finalized with the received print data.
• When [SBPL] > [Standard Code] in the [Applications] menu is disabled, the [Protocol]
setting will be changed to [SBPL].
[SBPL]
SBPL (SATO Barcode Printer Language) is used for the common commands that controls SATO
barcode label printers.
To use SBPL as a printer command, set the following items:
[Show Error]
Enable or disable the command error indication when incorrect command or parameter is detected in
the print data.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz