[Home Key Confirmation]
238
The options are as follows:
• [Home Screen]
• [Application]
• This setting is linked to the [Printing] > [Advanced] > [Start Online] menu. When
[Application] is selected, [Start Online] is enabled. When [Home Screen] is selected,
[Start Online] is disabled.
[Starting Application]
Select the application to start at product startup in AEP mode.
Appears only if [AEP] menu is enabled.
[Label Rotation]
Set whether to rotate the page orientation for label printing.
Appears only if [AEP] menu is enabled.
Rotates the page orientation 180 degrees.
Does not rotate the page orientation.
[Divider Label]
Set whether to print a label with a slanted line.
Appears only if [AEP] menu is enabled.
[Show On-Screen Keyboard]
Set whether to show the on-screen keyboard on the application screen.
Appears only if [AEP] menu is enabled.
The options are as follows:
When Required
The on-screen keyboard is shown.
Never
The on-screen keyboard is not shown.
[Home Key Confirmation]
From the application screen in AEP mode, the Online screen, or the Offline screen, set whether to
show a confirmation message or enable password input before returning to the Home screen.
The options are as follows:
To Next Page
Loading...
Need help?
General
