SATO CT4-LX User Manual

Settings Mode Operations
64
Settings Mode Operations
Each menu in the Settings mode contains many layers of submenus, as follows:
The operations differ depending on the following type of setting items.
Display image Description
Select/clear the checkbox by tapping it to enable/
disable the function.
Tap the item to show the next layer of the submenus.
Items with a pencil icon are items with changeable
values. Tap the setting item to show the detailed
options.
If the pencil icon is gray, the value cannot be
changed.
Tap an item from the list to select it.
The selected item is highlighted in the list.
There are two ways to adjust the setting value.
•
Tap / .
• Directly tap or slide the slider.
Tap to confirm the setting.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz