About This Manual
8
Before You Start
About This Manual
Thank you for purchasing the SATO CT4-LX (hereafter referred to as "the product").
This manual supplies basic information on how to operate the CT4-LX. Read the manual carefully to
understand each function of the CT4-LX before operation.
Symbols
This operator manual uses following symbols:
Item Description
Warning
The Warning symbol indicates that you can cause death or serious injury
if you do not follow the instructions or procedures.
Caution
The Caution symbol indicates that you can cause injury or property
damage if you do not follow the instructions or procedures.
Note
The Note symbol indicates useful and supplemental information that you
should know.
Reference
The Reference symbol indicates the link of relevant information.
• Reproduction in any manner of all or part of this manual is prohibited.
• The content of this manual is subject to change without notice.
• Great care has been taken in the preparation of this document, but if any problems,
mistakes, or omission are found, please contact your SATO reseller or technical
support.
• The illustrations and screenshots in this manual are for the combined direct thermal/
thermal transfer model, unless otherwise noted.
• This manual uses the build version 6.2.0-r11 firmware in its descriptions.
To Next Page
Loading...
Need help?
General
