SATO CT4-LX User Manual

151
Print Method (Combined Direct Thermal/Thermal Transfer Model Only)
For the combined direct thermal/thermal transfer model, you can select from two types of print
methods.
Thermal transfer
Prints using a ribbon.
Direct thermal
Prints using direct thermal media.
• Ribbon is not necessary if you are using direct thermal media.
The print method can be set through the Startup Guide, Media Startup, and Media Profiles
Registration. Alternatively, the following procedure can be used.
1. Tap [SETTINGS] on the Home screen or Offline screen.
2. Input the password if it is enabled.
3. Tap [Printing].

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz