SATO CT4-LX User Manual

[Notifications]
242
By enabling this function, the [Language] icon is added to the [SETTINGS] menu screen as below. You
can directly access the display language setting screen.
[Notifications]
Set the function to notify when to clean and replace parts.
The setting items are as follows:
[Clean Printhead]
Notify when the print head needs to be cleaned.
The setting items are as follows:
[Clean Printhead]
Enable or disable the notification function about when the print head needs to be cleaned.
[Cleaning Interval]
Set the notification interval about when the print head needs to be cleaned.
You can change the setting only if you enabled the [Clean Printhead] menu.
The product shows the print distance as a setting value. The setting range is from 10 to 1,000 m.
[Clean Counter]
Shows the current print distance.
[Change Printhead]
Notify when the print head needs to be replaced.
The setting items are as follows:
[Change Printhead]
Enable or disable the notification function about when the print head needs to be replaced.
[Printhead Interval]
Set the notification interval about when the print head needs to be replaced.
You can change the setting only if you enabled the [Change Printhead] menu.
The product shows the print distance as a setting value. The setting range is from 10 to 100 km.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz