SATO CT4-LX User Manual

241
[On-Screen Keyboard]
Set the language for the on-screen keyboard.
[Unit]
Set the unit of length for indication.
The options are as follows:
• [dot]
• ["] (inch)
• [mm]
[Time]
Set the time.
You can set the time only if you have installed the optional RTC kit and the NTP function is disabled.
1.
Set the current time by tapping / , and then tap .
2.
On the confirmation message, tap to cancel, or tap to confirm the setting.
[Date]
Set the date.
You can set the date only if you have installed the optional RTC kit and the NTP function is disabled.
1.
Set the current date by tapping / , and then tap .
2.
On the confirmation message, tap to cancel, or tap to confirm the setting.
[Time Zone]
Set the time zone.
First select the region from the map.
Then select the city from the list.
[Display Language Icon]
Set whether to display the [Language] icon on the [SETTINGS] menu.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz