SATO CT4-LX User Manual

301
Configuring the Product Settings from a Web Browser
Accessing to the Web Configuration Page
The product can be operated through a web configuration page using any browser.
With an Ethernet LAN or WLAN connection, users can remotely get information from the product or
perform the product settings.
• You need the product's IP address to access the web configuration page. The product
IP address can be checked in [SETTINGS] > [Information] > [LAN] or [Wi-Fi] menus.
1. Open up the browser and enter the product's URL.
If the product's IP address is 192.168.143.123, enter the following URL: https://192.168.143.123
When a security certificate is prompted, you must acknowledge and click Continue.
The web configuration page for the product appears. On the upper right (1) of each page, the
model name, current resolution and MAC address are shown.
2. Log in to view the [Settings] and [Tools] pages.
You can view [Dashboard] and [Certificates] pages without logging in.
a. Click [Login] (2).

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz