SATO CT4-LX User Manual

285
None
None
Level 2-1
PIN code authentication, service level, no encryption
Level 2-2
PIN code authentication, service level, encryption
Level 3
PIN code authentication, link level, no encryption
Level 4
Secure Simple Pairing compatible, service level, encryption (Can be communicated with devices
that are not compatible with Secure Simple Pairing)
[ISI]
Set the ISI communication parameter.
The setting range is 0, or from 18 to 4096.
Set to a value that is more than the ISW communication parameter setting value.
[ISW]
Set the ISW communication parameter.
The setting range is 0, or from 18 to 4096.
The setting range varies depending on the ISI communication parameter setting value.
Set to a value that is less than the ISI communication parameter setting value.
[PSI]
Set the PSI communication parameter.
The setting range is from 18 to 4096.
Set to a value that is more than the PSW communication parameter setting value.
[PSW]
Set the PSW communication parameter.
The setting range is from 18 to 4096.
The setting range varies depending on the PSI communication parameter setting value.
Set to a value that is less than the PSI communication parameter setting value.
[CRC Mode]
Enable or disable the CRC check function.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz