Loading a Media Roll (When the Optional Dispenser Unit Is Installed)
110
Loading a Media Roll (When the Optional Dispenser Unit Is Installed)
This topic explains how to load media when [Dispenser] is selected in print mode while the optional
dispenser unit is installed. If you have selected [Continuous] in print mode, the loading method is the
same as the standard.
• The print head and its surroundings are hot after printing. Be careful not to get burned.
• Touching the edge of the print head with your bare hand could cause injury.
• Labels with perforations is not available in dispenser mode since the perforated line
affects the dispenser function.
1. Press the cover open latch (1) to open the top cover (2).
2.
Press the dispenser cover lever (3) to open the dispenser cover (4) .
To Next Page
Loading...
