SATO CT4-LX User Manual

87
Startup Guide Cancelation
You can cancel the startup guide at any time.
1.
Press the (Power/Home) button while doing settings in the startup guide.
The screen to confirm whether or not to show the startup guide again appears.
2. Select whether or not to show the startup guide during the next startup.
Tap [CANCEL] to return to the startup guide setting without canceling it.
• You can set whether to open the startup guide the next time you start up the product in
[Startup Guide] in the [Tools] menu.
• Even if you cancel the startup guide before completing it, the product will save the
settings you have changed.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz