SATO CT4-LX - Media Sensor Positions and Media Stop Positions

311
Media Sensor Positions and Media Stop Positions
The positions of the media sensors and the media stop positions with the various print modes are as
follows:
(1) Center position
(2) Linerless cutter tear-off position
(3) Cutter tear-off position
(4) Cutter/linerless cutter position
(5) Dispensing stop position
(6) Tear-off position
(7) Label top sensor position
(8) Print head position
(9) Gap sensor position
(10) I-mark sensor position
(11) I-mark sensor position (RFID models)
(12) Gap sensor position (RFID models)
(13) I-mark sensor position (from edge of label)
(14) Gap sensor/label top sensor position (from center position)