[Imaging]
170
[Imaging]
Set the print reference position in the vertical and horizontal directions.
The setting items are as follows:
Vertical
Set the print position in the vertical direction.
Set the correction value from the print reference position as "-" for the direction of the paper feed
and "+" for the direction opposite to the paper feed.
(1) Feed direction
The setting range varies depending on the print resolution of the product.
The setting range is as follows:
Resolution Setting range
203 dpi (1 dot = 0.125 mm (0.0049")) -19999 to +19999 dots
305 dpi (1 dot = 0.083 mm (0.0033")) -17999 to +17999 dots
To Next Page
Loading...
