SATO CT4-LX User Manual

Adjusting the Print Speed
382
Adjusting the Print Speed
The adjustment of the print speed not only changes the speed of printing but also affects the print
quality.
The setting range varies depending on the print resolution of the product.
The setting range of the print speed is as follows:
Resolution Setting range
203 dpi (8 dots/mm) 2 to 8 ips (inches/sec) (50.8 to 203.2 mm/sec)
305 dpi (12 dots/mm) 2 to 6 ips (inches/sec) (50.8 to 152.4 mm/sec)
• If the optional linerless cutter unit is installed, the setting range is 2 to 4 ips.
1. Tap [SETTINGS] on the Home screen or Offline screen.
2. Input the password if it is enabled.
3. Tap [Printing].
4. Tap [Speed].

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz