SATO CT4-LX User Manual

41
Operations in the Panel That Is Displayed by Swiping the Screen
You can adjust the volume and brightness in the panel that is displayed by swiping the screen.
To open the panel, swipe down from the top of the screen.
(1) Slide the bar to adjust the brightness of the LCD.
You can do the settings equivalent to [System] > [LCD Brightness] in the Settings mode.
(2) Slide the bar to adjust the volume.
You can do the settings equivalent to [System] > [Sound] > [Volume] in the Settings mode.
• You can do the settings equivalent to [System] > [Sound] > [Bluetooth Volume] while a
Bluetooth device, such as a headset, is connected.
(3) Close the panel.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz