Name: SATO CT4-LX
Brand: SATO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

439

Cleaning the Inside of the Product (When Optional Linerless Cutter Unit

Is Installed)

This topic explains how to clean the inside of the product when the optional linerless cutter kit is

installed.

• Never use organic solvents, such as thinner and benzine to clean the product.

1. Make sure that the product is powered off, and disconnect the power cord from the

AC outlet.

2. Press the cover open latch (1) to open the top cover (2).

3. Remove the media and ribbon if they are already loaded.

Questions and Answers:

Need help?

Do you have a question about the SATO CT4-LX and is the answer not in the manual?

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz