Replacing the Optional Linerless Platen Roller
450
Replacing the Optional Linerless Platen Roller
You can easily remove and replace a damaged or worn linerless platen roller.
• Do not connect or disconnect the power cord while your hands are wet. Doing so could
cause an electric shock.
• Disconnect the power cord from the AC outlet before you replace the platen roller.
Guideline to Replace the Linerless Platen Roller
The linerless platen roller has a blue stripe on the center of the roller. When the blue striped marking
started to fade off, it indicates that you should replace the linerless platen roller.
• This is only a general guideline. The condition in which the linerless platen roller wears
out varies depending on the media that is used. In any case, replace the worn linerless
platen roller when it affects the printing quality of the product.
1. Make sure that the product is powered off, and disconnect the power cord from the
AC outlet.
2. Press the cover open latch (1) to open the top cover (2).
3. Remove the media if it is already loaded.
To Next Page
Loading...
