95
• If it does not communicate well, shift the Android device to the front, back, left and
right, and then hold it up again.
• For the operation of the NFC for the Android device, refer to the user manual for the
Android device.
LAN Interface Connection (Standard)
Connect the interface cable when the product is powered off.
Connect the LAN cable to the LAN connector (1) on the product.
The communication condition settings must be configured according to your network environment. Set
the IP address of the product.
The IP address of the product can be set through the product's [Interface] menu or the All-In-One Tool.
To Next Page
Loading...
