SATO CT4-LX User Manual

207
[Flow Control]
Set the communication protocol.
The options are as follows:
• [READY/BUSY Multi]
• [XON/XOFF Multi]
• [STATUS3]
• [STATUS4]
• [STATUS5]
• [None]
[BCC]
Enable or disable the BCC check function.
Available only if you have selected [STATUS5] in the [Flow Control] menu.
[USB]
Set the USB connection.
The setting items are as follows:
[Flow Control]
Set the communication protocol.
The options are as follows:
• [STATUS4]
• [STATUS5]
• [NONE]
[BCC]
Enable or disable the BCC check function.
Available only if you have selected [STATUS5] in the [Flow Control] menu.
[Change USB Serial]
Set the type of the USB serial number that the product returns.
Returns the USB serial number (00000000).
This option is suitable when you want to replace the product without adding a new printer driver.
To do so, you need to set this setting to enabled before installing the product.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz