SATO CT4-LX User Manual

Precautions for Loading the Media
106
Precautions for Loading the Media
Use our specified supply products for the product, for optimum print quality.
• The print head and its surroundings are hot after printing. Be careful not to get burned.
• Touching the edge of the print head with your bare hand could cause injury.
• The usable media sizes, the output speed, and print quality vary depending on the
media specifications, media and ribbon combination, product settings and output
environment. It is recommended to perform a test print with the media and ribbon to be
used in advance.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz