SATO CT4-LX User Manual

225
Print all characters with a fixed pitch.
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
Print zero with a slash.
Print zero without a slash.
[Format Save]
Set whether to save the user format data registered at printing in the product.
Save the user format data registered at printing in the product.
Do not save the user format data registered at printing in the product. The user format data
remains in the product memory until the product is powered off. You need to register a user format
again after reboot.
[STCL]
To use STCL as a printer command, set the following items:
[Command Head]
Set the command head.
The setting items are as follows:
[Control Code]
Set the control code.
The options are as follows:
Auto
Perform the protocol detection automatically.
ESC|LF|NUL
Set the control code to ESC|LF|NUL.
7B|7C|7D
Set the control code to 7B|7C|7D.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz