SATO CT4-LX - [Applications] Menu

417
Setting Item Initial Value User Reset/
Factory
Reset
[Search Level] Quick Yes
[Write Power] 15 dBm Yes
[Read Power] 15 dBm Yes
[Save settings]
[Model Name] RFID_TAG Yes
[Save] - -
[RFID Tag Model]
[Load] -Undefined- Yes
[Edit]
[Antenna Position] Normal Yes
[Antenna X Pos.] 14 mm Yes
[Antenna Y Pos.] 0 mm Yes
[Write Power] 15 dBm Yes
[Read Power] 15 dBm Yes
[Tag Offset]
[Tag Offset] 0 mm Yes
[Encoding Action] Normal Action Yes
[Pitch Size]
203 dpi
8 dots
305 dpi
12 dots
Yes
[Save as] RFID_TAG Yes
[Delete] - -
[Applications] Menu
The initial value refers to the setting value of the product when it was shipped from the factory. If you
reset the product, the setting values of the product will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.