SATO CT4-LX - Page 418

[Applications] Menu
418
• [Protocol]/[SBPL]
• [SZPL]/[SIPL]/[STCL]
• [SDPL]/[SEPL]
• Normally, it is not necessary to perform the initialization. Doing an initialization removes
all the product's settings that the customer changed.
• [Protocol]/[SBPL]
Setting Item Initial Value User Reset/
Factory Reset
[Protocol] AUTO Yes
[SBPL]
[Show Error] Disabled
RFID models: Enabled
Yes
[Standard Code] Enabled Yes
[Orientation] Portrait Yes
[Font Settings]
[Zero Slash] Enabled Yes
[Kanji]
[Kanji Set] GB18030 Yes
[Character Code] GB18030 Yes
[Kanji Style] Gothic Yes
[Proportional] Enabled Yes
[Code Page] 858 Yes
[€] D5 Yes
• [SZPL]/[SIPL]/[STCL]
Setting Item Initial Value User Reset/
Factory Reset
[SZPL]
[Label]
[Shift] 0 dot Yes