SATO CT4-LX User Manual

Environmentally Hazardous Materials
20
Environmentally Hazardous Materials
RoHS Directive
This product is in conformity with RoHS Directive 2011/65/EU on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment.
Compliance Status of REACH Regulation
(1) Status of registered chemical substances
No chemical substances are intentionally emitted, nor are there any chemical substances that are
registered with the European Chemicals Agency.
(2) Information about the Substances of Very High Concern (SVHC) contained in the product
Currently, there has been no information communicated regarding SVHC that exceed 0.1% of the
product's weight. In the future, if SVHC that exceed 0.1% of the product's weight are found, we
will immediately communicate that information.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz