SATO CT4-LX User Manual

Settings Mode Menus
60
Settings Mode Menus
There are the following menus in the Settings mode and each menu contains many layers of
submenus.
Menu Description
Printing Menu Access the settings related to printing.
Interface Menu Access the settings related to the interfaces.
Applications Menu Access the settings related to the printer's command.
Standalone Menu Access the settings related to the AEP (Application Enabled Printing)
mode.
System Menu Access the settings for the display language, buzzer volume,
compatibility mode, etc.
Tools Menu Do media startup, media profile editing, test prints, initialization and
other settings.
Information Menu Display the product information and guidance videos.
Language Menu Set the display language.
Appears if the [System] > [Regional] > [Display Language Icon] menu
is enabled.
Bluetooth Menu Configure settings related to Bluetooth.
This information is shown only when the optional wireless LAN/
Bluetooth kit is installed.
Wi-Fi Menu Configure settings related to wireless LAN.
This information is shown only when the optional wireless LAN/
Bluetooth kit is installed.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz