SATO CT4-LX User Manual

[Wi-Fi Direct]
280
[Cutter]
Shows the current number of cuts.
[LAN]
Shows the address of the LAN interface.
The items are as follows:
LAN IPv4 Address
Shows the IPv4 address of the LAN.
LAN IPv6 Address
Shows the IPv6 address of the LAN.
LAN MAC
Shows the MAC address of the LAN.
[Wi-Fi]
Shows the address of the wireless LAN interface.
This information is shown only when the optional wireless LAN/Bluetooth kit is installed.
The items are as follows:
Wi-Fi IPv4 Address
Shows the IPv4 address of the wireless LAN.
Wi-Fi IPv6 Address
Shows the IPv6 address of the wireless LAN.
Does not appear when Wi-Fi Direct is active.
Wi-Fi MAC
Shows the MAC address of the wireless LAN.
Wi-Fi Region
Shows the region information of the wireless LAN.
Wi-Fi Status
Shows the status of the wireless LAN.
[Wi-Fi Direct]
Shows the connection information of Wi-Fi Direct.
Appears only when the optional wireless LAN/Bluetooth kit is installed and you are connected using
Wi-Fi Direct.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz