SATO CT4-LX User Manual

[Service]
270
Not available if no profile is registered.
The procedure is as follows:
1. Tap the profile to be loaded.
2.
Tap on the message.
[Save]
Overwrite and save the current product settings to a registered profile.
Not available if no profile is registered.
The screen shows a list of the profiles registered in the product.
The procedure is as follows:
1. Tap the profile to be overwritten.
2.
Tap on the message.
[Save as]
Register the current product settings as a new profile.
Enter a name for the profile to be registered as.
You can enter a maximum of 32 characters. You can use alphabet (capital and small letters), numbers
and symbols.
Tap on the on-screen keyboard to confirm.
The new profile name appears on the [Save], [Load] and [Start with] lists.
[Start with]
Select the profile to be loaded at product startup.
Not available if no profile is registered.
The procedure is as follows:
1. Tap the profile to be loaded at product startup.
2.
Tap on the message.
[Service]
These are the setting items for service.
Strictly for SATO authorized service personnel use.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz