Select a Safe Location
14
Precautions for Installation and Handling
Select a Safe Location
Product operations can be affected by the product's environment.
Refer to the following instructions regarding how to install and handle the product.
Install the product on a surface that is flat and level.
Installing the product on a surface that is tilted, and not flat, may reduce the print quality. This may
also cause malfunctions and decrease the life span of the product.
Do not install the product in a location that vibrates.
Subjecting the product to extreme physical shock or vibration may cause malfunctions or damage
the product or lead to the product breakdown.
Do not use or store the product in a location where the temperature and/or humidity are high.
Avoid locations subject to extreme or fast changes in temperature or humidity.
Do not place the product near heating equipment such as a cooking appliance or heater, or in
other high-temperature locations.
The product may break.
Do not use or store the product in a location exposed to water or oil.
Water or oil entering inside the product may cause a fire, electric shock or malfunction.
Avoid dust.
Dust build up may result in reduced print quality, malfunctions, or damage.
Keep out of direct sunlight.
The product has a built-in optical sensor. Exposure to direct sunlight may cause false detections
by the sensor, and may cause the product to not operate correctly. In addition, close the cover
when using the product.
Do not use in hazardous locations.
Do not use in a potentially explosive environment or atmosphere. Doing so could cause a fire or
explosion.
Do not supply power from an AC outlet near electrical equipment with high power
consumption.
Doing so could cause malfunctions or damage due to electrical noise or voltage reduction.
To Next Page
Loading...
Need help?
General
