[Reset]
268
• Printing the contents of the file may use a lot of media.
• When [Hex Dump Mode] is enabled, it may take some time before the files appear.
[Reset]
Initialize the settings or data of the product.
The setting items are as follows:
[Data]
Initialize the data saved in the product.
The data that is initialized is the fonts and graphics registered in the product.
When you select [Data], a screen to confirm initialization appears.
Tap to execute the initialization. When the initialization is complete, the product restarts.
• Normally, it is not necessary to perform the initialization. Doing so could change the
print conditions.
[Data & Settings]
Initialize the product's data and setting values.
The data that is initialized is the fonts and graphics registered in the product.
Select the setting items to be initialized.
The options are as follows:
User Reset
Initialize the data and setting values.
User Reset (-Interface)
Initialize the data and setting values, except the interface settings.
Factory Reset
Initialize to the factory default settings.
Factory Reset (-Interface)
Initialize the setting items, except the interface settings, to the factory default settings.
Interface
Initialize the data and setting values for the interface settings.
Printing
Initialize the data and setting values in the [Printing] menu.
When you select which items to initialize, a screen to confirm initialization appears.
Tap to execute the initialization.
To Next Page
Loading...
