SATO CT4-LX User Manual

267
◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2. Tap the file to copy. The selected file name is highlighted.
3.
Tap to copy the selected file to the USB memory.
• When [Hex Dump Mode] is enabled, it may take some time before the files appear.
[Remove]
Delete the log files of the product.
The procedure to delete the log files is as follows:
1. Tap the file type from the list to delete.
◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2. Tap the file to delete. The selected file name is highlighted.
3.
Tap to delete the selected file.
• When [Hex Dump Mode] is enabled, it may take some time before the files appear.
[Print]
Print a hex dump of the log files of the product.
The procedure to print the log files is as follows:
1. Tap the file type from the list to print.
◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2. Tap the file to print. The Offline screen appears.
3. Tap [ONLINE] to start printing.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz