243
[Printhead Count]
Shows the current print distance.
[Change Cutter]
Notify when the cutter unit needs to be replaced.
The setting items are as follows:
[Change Cutter]
Enable or disable the notification function about when the cutter unit needs to be replaced.
[Cutter Life]
Set the notification interval about when the cutter unit needs to be replaced.
You can change the setting only if you enabled the [Change Cutter] menu.
The product shows the cutter count as the setting value. The setting range is from 10,000 to
1,000,000.
[Cutter Count]
Shows the current number of cuts by the cutter.
[Change Platen]
Notify when the platen roller needs to be replaced.
The setting items are as follows:
[Change Platen]
Enable or disable the notification function about when the platen roller needs to be replaced.
[Platen Interval]
Set the notification interval about when the platen roller needs to be replaced.
You can change the setting only if you enabled the [Change Platen] menu.
The product shows the fed distance as the setting value. The setting range is from 10 to 100 km.
[Platen Count]
Shows the current distance the platen roller has fed.
[Sound]
Set the buzzer sounds and operating sounds of the product.
The setting items are as follows:
[Volume]
Set the volume.
Does not appear while a Bluetooth device, such as a headset, is connected.
The setting range is from 0 to 8.
To Next Page
Loading...
Need help?
General
