SATO CT4-LX - [Wi-Fi] Menu; [Enable]; [Wi-Fi Setting]

287
[Wi-Fi] Menu
This information is shown only when the optional wireless LAN/Bluetooth kit is installed.
•
After finishing the settings, tap . After a message asking you whether to save the
settings appears, tap .
•
Tap to discard the changes. Tap on the message to confirm whether you
want to discard the changes.
The following settings are available in the [Wi-Fi] menu:
[Enable]
Enable or disable the Wi-Fi connection.
[Wi-Fi Setting]
Set the wireless LAN.
Appears only when the [Enable] menu is enabled.
The setting items are as follows:
[IPv4 (Wi-Fi)]
Configure IPv4 for Wi-Fi.