SATO CT4-LX User Manual

Usable Media
530
Usable Media
• Use our specified supply products.
Type
• Media roll (Face-in wound/face-out wound)
• Fan-fold media
• Rolls of wristbands (face-out)
RFID models:
• Media roll (face-out)
• Fan-fold media
Size (Label Type)
• Continuous
Item Description
Media Length 7 to 397 mm (0.28" to 15.63")
RFID tag: 25 to 397 mm (0.98" to 15.63")
Media Length (With Liner) 10 to 400 mm (0.39" to 15.75")
RFID tag: 28 to 400 mm (1.10" to 15.75")
Media Width 22 to 115 mm (0.87" to 4.53")
Media Width (With Liner) 25 to 118 mm (0.98" to 4.65")
• Above media length and width are valid for die-cut labels. For media without liner like
tags, refer to the value 'with liner'.
• Tear-Off
Item Description
Media Length 22 to 397 mm (0.87" to 15.63")
RFID tag: 25 to 397 mm (0.98" to 15.63")
Media Length (With Liner) 25 to 400 mm (0.98" to 15.75")
RFID tag: 28 to 400 mm (1.10" to 15.75")
Media Width 22 to 115 mm (0.87" to 4.53")
Media Width (With Liner) 25 to 118 mm (0.98" to 4.65")

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz