SATO CT4-LX User Manual

[SZPL]
222
◦ [UTF-8]
• When set to [KSC5601]
◦ [KSC5601]
◦ [UTF-8]
[Kanji Style]
Set the font to be used.
The options are as follows:
• [Mincho]
• [Gothic]
[Proportional]
Set whether to print each character using a proportional pitch or fixed pitch.
Print each character with a proportional pitch.
Print all characters with a fixed pitch.
[Code Page]
Select the code page to be used from the list.
[€]
Set the European currency symbol to the ASCII code.
The setting range is from 0 to FF (hexadecimal).
[SZPL]
To use SZPL as a printer command, set the following items:
[Label]
Set the print position.
The setting items are as follows:
[Shift]
Set the shift offset position of the label.
The setting range varies depending on the print resolution of the product.
The setting range is as follows:

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz