Startup Guide Flow
86
• [Fanfold] is not displayed if the optional dispenser unit is installed.
• [Install Ribbon] is displayed only if [Use Ribbon] is selected for [Printing Mode] on the
combined direct thermal/thermal transfer model.
11.
When you have finished loading the media and ribbon, tap on the video's
screen to stop the video.
Returns to the screen for selecting a video.
12.
Tap or slide the screen to the left.
The confirmation screen appears.
13.
If you want the startup guide to show the next time you start up, tap . If not, tap
.
The Home screen appears.
• You can set whether to open the startup guide the next time you start up the product in
[Startup Guide] in the [Tools] menu.
To Next Page
Loading...
