SATO CT4-LX User Manual

[Wi-Fi Setting]
300
[Username]
Set the user name.
You can enter 0 to 63 characters. Alphabets, numbers and symbols can be used.
[Password]
Set the password.
You can enter 0 to 32 characters. Alphabets, numbers and symbols can be used.
[Anon. Outer ID]
Set the external ID.
Appears only if you have selected [FAST], [PEAP], or [TTLS] in the [EAP Mode] menu.
You can enter 0 to 63 characters. Alphabets, numbers and symbols can be used.
[Verify Server Cert.]
Enable or disable server certificate validation.
Appears only if you have selected anything other than [LEAP] in the [EAP Mode] menu.
[Private Key P/W]
Set the Private Key password.
Available only if you have selected [TLS] in the [EAP Mode] menu.
You can enter 0 to 64 characters. Alphabets, numbers and symbols can be used.
[PAC Auto Provisioning]
Enable or disable PAC auto provisioning.
Available only if you have selected [FAST] in the [EAP Mode] menu.
[PAC Password]
Set the PAC password.
Appears only if you have selected [FAST] in the [EAP Mode] menu and if you disabled [PAC Auto
Provisioning].
You can enter 0 to 64 characters. Alphabets, numbers and symbols can be used.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz