SATO CT4-LX User Manual

[SBPL]
220
Enable the command error indication. The command error is shown and the print operation is
paused when incorrect command or parameter is detected in the print data.
Disable the command error indication.
[Standard Code]
Set the protocol code.
Use a standard code.
Use a non-standard code.
• A message prompting you to restart the product will appear on the Home screen if
you have made any changes. In such a case, reboot the product to apply the settings.
When [AUTO] is selected in the [Protocol] menu while this setting is disabled, this
setting will become enabled.
[Orientation]
Select the layout for printing the label.
Portrait
Use a portrait layout. (No rotation)
Landscape
Use a landscape layout. (90-degree rotation)
Inv. Portrait
Use an inverse portrait layout. (180-degree rotation)
Inv. Landscape
Use an inverse landscape layout. (270-degree rotation)
[Font Settings]
Set the font.
The setting items are as follows:
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
This setting is applied to the following bitmap fonts:
U, S, M, WB, WL, XU, XS, XM, XL, X20, X21, X22, X23, X24

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz