SATO CT4-LX User Manual

195
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [User Security] menu.
The options are as follows:
• [DES]
• [AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [User Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Read-Write]
Set the read-write function.
The setting items are as follows:
[SNMP Version]
Set the SNMP version.
The options are as follows:
• [1|2c|3]
• [1|2c]
• [3]
• [Disabled]
[Community]
Set the read-write community name.
Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: private
[User]
Set the read-write user name.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
You can enter 1 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: rwuser
[User Security]
Set the read-write security level.
Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
The options are as follows:
• [None]

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz