SATO CT4-LX User Manual

[Network]
198
The default engine ID is created from the MAC address.
Hexadecimal characters are allowed and the range is from 10 to 64 characters. (Only an even number
of characters is allowed.)
[Security]
Set the security level.
Appears only if you have selected [3] in the [SNMP Version] menu.
The options are as follows:
• [None]
• [Authentication]
• [Privacy]
[Authentication Protocol]
Set the authentication protocol.
Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
The options are as follows:
• [MD5]
• [SHA]
[Authentication Passphrase]
Set the authentication passphrase.
Appears only if you have selected [Authentication] or [Privacy] in the [Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Privacy Protocol]
Set the privacy protocol.
Appears only if you have selected [Privacy] in the [Security] menu.
The options are as follows:
• [DES]
• [AES]
[Privacy Passphrase]
Set the privacy passphrase.
Appears only if you have selected [Privacy] in the [Security] menu.
You can enter 8 to 32 characters. Alphabets, numbers and symbols can be used.
Initial setting: mypassword
[Online Services] (SOS users only)
Set the functions for SOS (SATO Online Services).
To use SOS, it is necessary to first create an SOS account and add the product.
For details on the SOS, refer to the SOS portal site.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz