Name: SATO CT4-LX
Brand: SATO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

265

• If [Hex Dump Mode] is enabled, [HEX-Dump] appears on both the Online and Offline

screens.

• You can save a maximum of 10 received data files for each type of interface.

Depending on the file size, the number of files you can save will be less than 10.

• The details of the files created inside "hexdump/" of the product are as follows:

BT00xx.bin

Received data through Bluetooth.

LAN00xx.bin

Received data through LAN.

NFC00xx.bin

Received data through NFC.

PIPE00xx.bin

Received data through pipe.

SCI00xx.bin

Received data through RS-232C.

USB00xx.bin

Received data through USB.

WIFI00xx.bin

Received data through wireless LAN.

• Even if you enable [Hex Dump Mode], it is disabled when you reboot the product.

Questions and Answers:

Need help?

Do you have a question about the SATO CT4-LX and is the answer not in the manual?

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz