SATO CT4-LX User Manual

Settings
306
(8) [Language]
You can do the settings equivalent to the [Language] menu in the Settings mode.
• Appears if the [System] > [Regional] > [Display Language Icon] menu is enabled.
(9) [Bluetooth]
You can do the settings equivalent to the [Bluetooth] menu in the Settings mode.
• This information is shown only when the optional wireless LAN/Bluetooth kit is
installed.
(10) [Wi-Fi]
You can do the settings equivalent to the [Wi-Fi] menu in the Settings mode.
• This information is shown only when the optional wireless LAN/Bluetooth kit is
installed.
The screen below is the example of [Printing] page.
• If a message prompting you to restart the product appears at the top of the page, click
[Reboot printer] to reboot the product to apply the settings.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz