SATO CT4-LX - RFID Write with Continuous Mode (Tag Offset > 0)

345
RFID Write with Continuous Mode (Tag Offset > 0)
*1 Because the EPC code read, RFID read [DC2]PJ, and UID/EPC/IDm print <TU> commands
acquire the information at this inlay position, do not use them if the Tag Offset is set to other than an
initial value.
*2 The EPC code write <IP0> command writes the data at this inlay position. The EPC code read, and
UID/EPC/IDm return <RU> commands acquire the information at this inlay position.