371
5. Change the setting value.
The setting range is as follows:
Resolution Setting range
203 dpi (1 dot = 0.125 mm (0.0049")) -30 to +30 dots
305 dpi (1 dot = 0.083 mm (0.0033")) -45 to +45 dots
• Do not allow the distance between [Pitch] and [Offset] after adjustments to exceed the
size of 1 label (including liner).
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
6.
Tap to save the setting value.
7.
Press the (Power/Home) button to show the Home screen.
To Next Page
Loading...
