379
Resolution Setting range
305 dpi (1 dot = 0.083 mm (0.0033")) -45 to +45 dots
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
6.
Tap to save the setting value.
7.
Press the (Power/Home) button to show the Home screen.
8.
Press the (Power/Home) button to go to Online mode.
Execute printing so you can check the adjusted print start position.
• While the print job is paused, the [Adjustments] menu appears instead of the
[SETTINGS] menu and you can adjust the position of the label top sensor.
To Next Page
Loading...
